Calculation of the amount of tile adhesive for laying tiles
An online tile adhesive calculator will help you calculate the required amount of adhesive for laying ceramic tiles, porcelain tiles, mosaics on the floor and walls. The floor area, tile size, joint width, consumption rate and margin for losses and adjustment are taken into account.
The tile adhesive calculator uses precise formulas to calculate the amount of material based on the type of adhesive, tile size, installation method and working conditions. Suitable for calculating various types of adhesives: cement, dispersion, epoxy, polyurethane. Calculation formula: Amount of glue = (Floor area - Area of openings) × Consumption rate (kg/m²) × (1 + Stock / 100).
Let's look at practical examples of calculating the amount of tile adhesive for various rooms and types of tiles:
Standard bathroom with ceramic tiles 30x30 cm
Входные данные:
Floor area: 6 m²
Opening area: 0.5 m²
Tile size: 0.09 m² (30×30 cm)
Seam width: 2 mm
Consumption rate: 4 kg/m²
Stock: 10%Расчёт:
Usable area: 6 - 0.5 = 5.5 m²
Glue consumption: 5.5 × 4 = 22 kg
With reserve: 22 × 1.1 = 24.2 kg
Packages (25 kg): 24.2 / 25 = 0.97 ≈ 1 packageРезультат:
Required: 24.2 kg (1 package 25 kg)
Тип:
Cement glue
Standard bathroom, it is recommended to take 1-2 packages with a small margin
Kitchen with porcelain stoneware 60×60 cm
Входные данные:
Floor area: 12 m²
Opening area: 1.2 m²
Tile size: 0.36 m² (60×60 cm)
Seam width: 3 mm
Consumption rate: 5 kg/m²
Stock: 15%Расчёт:
Usable area: 12 - 1.2 = 10.8 m²
Glue consumption: 10.8 × 5 = 54 kg
With reserve: 54 × 1.15 = 62.1 kg
Packs (25 kg): 62.1 / 25 = 2.48 ≈ 3 packsРезультат:
Required: 62.1 kg (3 packs of 25 kg)
Тип:
Dispersion glue
For large-format tiles, an increased margin of 15% is recommended.
Small hallway with ceramic tiles 20×20 cm
Входные данные:
Floor area: 3 m²
Opening area: 0.3 m²
Tile size: 0.04 m² (20×20 cm)
Seam width: 2 mm
Consumption rate: 3.5 kg/m²
Stock: 10%Расчёт:
Usable area: 3 - 0.3 = 2.7 m²
Glue consumption: 2.7 × 3.5 = 9.45 kg
With reserve: 9.45 × 1.1 = 10.4 kg
Packages (25 kg): 10.4 / 25 = 0.42 ≈ 1 packageРезультат:
Required: 10.4 kg (1 package 25 kg)
Тип:
Cement glue
For small tiles, glue consumption is less
Bathroom 2.5x2 meters with mosaic 10x10 cm
Входные данные:
Floor area: 5 m²
Opening area: 0.5 m²
Tile size: 0.01 m² (10×10 cm)
Seam width: 2 mm
Consumption rate: 6 kg/m²
Stock: 15%Расчёт:
Usable area: 5 - 0.5 = 4.5 m²
Glue consumption: 4.5 × 6 = 27 kg
With reserve: 27 × 1.15 = 31.05 kg
Packs (25 kg): 31.05 / 25 = 1.24 ≈ 2 packsРезультат:
Required: 31.05 kg (2 packages of 25 kg)
Тип:
Dispersion glue
For mosaics, glue consumption is higher due to the large number of seams
Living room 6x5 meters with porcelain tiles 120x60 cm
Входные данные:
Floor area: 30 m²
Opening area: 2.5 m²
Tile size: 0.72 m² (120×60 cm)
Seam width: 3 mm
Consumption rate: 6 kg/m²
Stock: 15%Расчёт:
Usable area: 30 - 2.5 = 27.5 m²
Glue consumption: 27.5 × 6 = 165 kg
With reserve: 165 × 1.15 = 189.75 kg
Packs (25 kg): 189.75 / 25 = 7.59 ≈ 8 packsРезультат:
Required: 189.75 kg (8 packs of 25 kg)
Тип:
Epoxy glue
Very large tiles require special adhesive and increased consumption
Insulated balcony with ceramic tiles 30×30 cm
Входные данные:
Floor area: 1.5 m²
Opening area: 0 m²
Tile size: 0.09 m² (30×30 cm)
Seam width: 2 mm
Consumption rate: 4 kg/m²
Stock: 10%Расчёт:
Usable area: 1.5 - 0 = 1.5 m²
Glue consumption: 1.5 × 4 = 6 kg
With reserve: 6 × 1.1 = 6.6 kg
Packages (25 kg): 6.6 / 25 = 0.26 ≈ 1 packageРезультат:
Required: 6.6 kg (1 package 25 kg)
Тип:
Frost-resistant glue
For the balcony it is recommended to use frost-resistant glue
The calculation of tile adhesive includes several stages to obtain an accurate result, taking into account all the parameters of the room and the type of tile.
Основные типы плиточного клея и их характеристики:
3-5 кг/м²
4-6 кг/м²
5-7 кг/м²
3-4 кг/м²
Расход клея в зависимости от размера плитки:
0.01 м²
0.04 м²
0.09 м²
0.36 м²
0.72 м²
Using a tile adhesive calculator provides many advantages when planning renovations: accurate calculation of the amount of material, saving money, planning purchases, minimizing waste.
The calculator uses proven formulas taking into account all the parameters of the room, type of tiles and adhesive to obtain an accurate result.
Correct calculation allows you to avoid waste of material and unnecessary costs for purchasing unnecessary glue packages.
Knowing in advance the required amount of glue, you can plan the budget and purchase of materials for repairs.
The calculator's simple and intuitive interface allows you to quickly calculate the required amount of tile adhesive.
To get an accurate result, follow our recommendations when calculating tile adhesive.
To calculate tile adhesive, measure the floor area, subtract the area of the openings, multiply by the consumption rate (usually 3-6 kg/m²) and add a margin of 10-15%. The calculator will automatically perform all calculations.
The consumption of tile adhesive is usually 3-5 kg/m² for standard tiles measuring 30×30 cm. For large-format tiles (60×60 cm and larger) the consumption can be 5-7 kg/m².
For mosaics, glue consumption is higher due to the large number of seams. It is recommended to use a consumption rate of 5-7 kg/m² and increase the margin to 15-20% for adjustment.
For porcelain tiles, it is recommended to use reinforced cement adhesive or dispersion adhesive with increased adhesion. Consumption is 5-6 kg/m² for tiles measuring 60x60 cm.
Yes, the width of the seam affects the glue consumption. The wider the seam, the greater the glue consumption. For a seam of 2-3 mm, the consumption is standard; for a seam of 5 mm or more, the consumption increases by 10-15%.
For the bathroom, use moisture-resistant dispersion adhesive. Measure the floor area, subtract the area of the openings. For standard 30x30 cm tiles, use a consumption rate of 4-5 kg/m² with a margin of 10-15%.
A standard package of tile adhesive weighs 25 kg. There are also packages of 5 kg, 10 kg and 50 kg. For large volumes, it is more convenient to buy packages of 25 or 50 kg.
For flooring, measure the area in square meters. Keep in mind that floors usually require more adhesive due to the higher load. Use a consumption rate of 4-6 kg/m² depending on the size of the tiles.
For walls, the calculation is similar to that for the floor. Measure the area of the walls, subtract the area of windows and doors. For walls, you can use a slightly lower consumption rate of 3-4 kg/m² for standard tiles.
Cement adhesive is universal, suitable for dry rooms. Dispersion adhesive is moisture-resistant, suitable for bathrooms and kitchens. Consumption for both types is approximately the same - 3-5 kg/m².
For the kitchen, use moisture-resistant dispersion adhesive or reinforced cement adhesive. Measure the floor area, subtract the area of the openings. For standard tiles, use a consumption rate of 4-5 kg/m² with a margin of 10-15%.
For 60x60 cm tiles, the adhesive consumption is usually 5-6 kg/m². This is due to the large size of the tiles and the need for a thicker layer of adhesive for reliable fixation.
For the hallway, measure the floor area. Take into account high traffic, use wear-resistant glue. For standard tiles, use a consumption rate of 4-5 kg/m² with a margin of 10%.
Yes, be sure to buy glue with a margin of 10-15% for adjustment, defects and possible errors during installation. The stock will help to avoid a situation where one bag is missing and it is difficult to find exactly the same one in the store.
For standard size ceramic tiles (30x30 cm), use a consumption rate of 3-4 kg/m². Measure the floor area, subtract the area of the openings, multiply by the consumption rate and add a margin of 10-15%.
Epoxy adhesive is a two-component adhesive for difficult operating conditions. It is very durable, moisture resistant, but expensive. Consumption is 5-7 kg/m². Used for industrial premises and difficult conditions.
For the toilet, measure the floor area. Use moisture-resistant dispersion adhesive. Consider the small area of the room. For standard tiles, use a consumption rate of 4 kg/m² with a margin of 10%.
The cost of tile adhesive depends on the type, manufacturer and quality. Cement adhesive costs from 150 to 500 rubles/bag (25 kg), dispersion adhesive - from 300 to 800 rubles/bag, epoxy - from 1000 to 3000 rubles/bag.
For balconies, use frost-resistant glue for exterior work or insulated balconies. Measure the floor area. Consider temperature changes. Use a consumption rate of 4-5 kg/m² with a margin of 15% for difficult conditions.
For walls, the adhesive consumption is usually slightly less than for the floor - 3-4 kg/m² for standard 30x30 cm tiles. This is due to the fact that on the walls the load is less and a thinner layer of adhesive can be used.
For large tiles (60×60 cm and more), the adhesive consumption increases to 5-7 kg/m². This is due to the need for a thicker layer of adhesive to securely fix large tiles. Add a margin of 15%.
Polyurethane adhesive is a flexible one-component adhesive for large tiles and difficult conditions. It is very elastic and moisture resistant. Consumption is 3-4 kg/m². More expensive than cement glue.
For an apartment, calculate the area of each room separately. Use different types of glue for different rooms (moisture-resistant for the bathroom and kitchen, regular for living rooms). Add up the results for the total number of packages.
Yes, the size of the tile directly affects the adhesive consumption. The larger the tile, the greater the glue consumption. For small tiles (up to 20×20 cm) consumption is 3-4 kg/m², for medium (30×30 cm) - 4-5 kg/m², for large (60×60 cm and more) - 5-7 kg/m².
For complex shapes (niches, protrusions, corners), add a margin of 15-20% to the usual calculation. Consider the need to adjust the tiles and the additional cost of adhesive in hard-to-reach places.
For very large tiles 120x60 cm, the adhesive consumption is 6-7 kg/m². This is due to the large size of the tiles and the need for a thick layer of adhesive for reliable fixation. Use special adhesive for large format tiles.
For a house, calculate the area of each room separately. Use different types of glue for different spaces. Add up the results for the total number of packages. Keep in mind that for large rooms it is better to buy glue in bulk.
White tile adhesive is used on light-colored tiles and mosaics to prevent dark adhesive from showing through the tiles. Consumption is the same as for conventional glue - 3-5 kg/m². Costs more than regular glue.
For heated floors, use a special elastic adhesive that can withstand temperature changes. Consumption is 4-6 kg/m². Add a margin of 15% to account for thermal expansion.
The drying time of tile adhesive depends on the type. Cement adhesive dries in 24-48 hours, dispersion adhesive - 12-24 hours, epoxy adhesive - 6-12 hours. Consider drying time when planning your work.